HOW TO MIX MATERIAL FAST WITH A 1/2″ DRILL DRIVER [VIDEO]
Introducing the TrowelPave Mixing Wand. It is a specially designed mixing tool for use on any 1/2″ drive drill with a steel chuck and handle attachment.
The Wand is ideal for mixing TrowelPave Asphalt or Concrete material in a 5-gallon bucket. The design helps prevent slinging material and it mixes the aggregate and binder thoroughly. With an optional rubber foot for the 5-gallon bucket, mixing is even easier because of reduced spinning.
Before mixing, always wear Personal Protective Equipment (PPE) including gloves, safety glasses, a long sleeve shirt, and long pants, along with closed-toe shoes.
To mix a 20-pound bucket kit of TrowelPave, simply add 2/3 of the aggregate to a 5-gallon bucket. Before adding the binder, make a cone shaped divot in the aggregate by hand. This will help prevent from spinning the binder inside the bucket and maximizes the mixing process. Add the remaining 1/3 of aggregate on top. Insert the TrowelPave Mixing Wand into a complementary drill driver and tighten chuck securely. Insert wand into aggregate and begin mixing, slowly at first, and then progressively faster. For best results, use an angular motion and then tilt vertical while mixing.
For more information on TrowelPave Asphalt, visit the product page at TechniSoil.com for installation guides, FAQ’s, and more.
For more information on TrowelPave Concrete, visit the product page at TechniSoil.com for installation guides, FAQ’s, and more.